high technology in medical equipment

Medical devices



NCDS clinic now open  

Check out the new website of NCDS Clinic in Bratislava.

18.5.2015 12:03
Pictures from NO therapy of diabetic foot by PLASON device

The PDF with the short report with pictures from the therapy of a diabetic foot can be viewed or downloaded here

The pictures from the treatment of unhealing wounds an be found here:

The pictures from the treatment of unhealing wounds an be found here:

12.5.2011 12:23
We have exhibited our devices on the prestigious MEDTEC UK exhibition in Birmingham

ONKOCET Ltd. has exhibited the devices from its portfolio on the MEDTEC UK exhibition in Birmingham, April 2011 through our partner Medical & Partners.

MEDTEC UK exhibition medical device

12.4.2011 12:27
Certification of SVIT infrared camera completed

The ONKOCET company has successfully reached the certification of yet another medical device, Infrared Camera SVIT. The Certificate can be found here. The videos from the device operation can be found here.
4.3.2011 11:38
Certification of Concor Soft Contact Lenses successfully finished.  

We are pleased to inform our business partners, that our company has succesfully finished the certification process of Concor Soft Contact Lenses.

You can find the certificate here.

More information on Concor Soft Contact Lenses go to section Medical preparations/Concor soft contact lenses, or follow this link.
16.6.2010 11:51
Certification of MAS-1K Spirometer successfully finished.

Our company has finished the certification process for another medical device, computerized spirometer MAS-1K with oximeter. You can find the device certificate here.
2.6.2010 10:58
New version of AMP device available   

Since May 2010 there is a new version of AMP device available.

Follow this link if you want to see the pictures and specifications of the device.

11.5.2010 15:17
Treatment of burns with PLASON We added photographs of treatment of burns with PLASON device: 
17.3.2010 12:08
Certification of PLASON device finished, CE issued.

Dear partners,

In October 2009 we have received CE certificate for another device from our portfolio, NO therapeutical device PLASON. You can find more information about this revolutionary device, used for healing of unhealing wounds, diabetic foot, or for cosmetical purposes, at our webpage, section "Medical devices" -> PLASON-NO Therapy.

Best regards

Team of ONKOCET Ltd. company

23.1.2009 15:30



Cryogenic physiotherapy is the combination of recent achievements in physics and refers to the technologies of 21st century. Scientific achievements analysis allowed defining the mechanism of stimulating effect on human body. Cryogenic equipment produced according to the modern idea of medical effect of lower temperatures, provides high positive results of low temperatures, minimum discomfort for the patient.


Cryogenic physiotherapy is the fastest and the most comfortable cosmetic procedure. A man up to the neck immersed in the gas cooled up to -150°C for 2 – 3 minutes. The temperature and the time of the procedure is defined according to the peculiarities of human skin therefore during the course of treatment only thin surface skin layer is cooled where heat receptors are. In general the body doesn`t have sensitive overcooling. Because of specific conditions of cooling gas the procedure is comfortable enough, it is really nice to feel cold especially in summer time.

People, who once tried cryothera-peutical treatment, repeat it with pleasure, in spite of rather high cost (10 to 20 euro per one procedure). The reason for its popularity is that the procedure causes emissions of endorphins. In order to get the same effect it´s necessary to have intensive physical exercises during 1,5 – 2 hours. Safe and short effect is so great, that endorphins are produced in bodies at hang-over, 2 – 3 minutes in cryosauna and hard “morning” disease goes away.

The main therapeutic effect is that the body mobilizes under cooling. The immunity increases, the aches go away, the skin metabolism activates. The treatment gives great cosmetic effect, particularly in cellulites and overweight treatment. The list of positive cryotherapeutical usage results can be enormous, because the procedure balances the immunity and the metabolism, i.e. removes original reasons of all diseases. But for the success it is necessary to use cryosaunas, which are able to provide maintaining of cryotherapeutical method.

Cryotherapeutical method

The main problem of practical cryotherapy is the wrong understanding of the reasons of positive results. Many specialists believe that for the recovery it is necessary to enter the cold room. In fact the procedures in cryosauna are effective only in the case if temperature on skin surface lowers below 0°C. For the skin such short overcooling is safe, but cold skin receptors send alarm signal of great power, that under its influence the most difficult diseases. In order to cool the skin properly the gas temperature should not be more than -130°C, and the time of treatment no less than 2 min. The contact area between skin and gas plays one of the main roles. You should immerse the most part of the body in cold and wear minimum of clothes. The more receptors are in overcooling zone, the better result will be. Cryotherapy is used for the treatment of bronchial astma, rheumatoid polyarthritis, psoriasis, eczema, allergy, burns, injuries etc.

Cryosauna with using of nitrogen cooling

The proper choice of the equipment for cryotherapeutical treatment is the main reason for providing of good medical and commercial success. The temperature in cryosauna should be more than -130°C. Utilization experience shows, that this requirement is met only in cryosaunas using liquid nitrogen as a cooling source. The gas cooling before it`s supplying into the procedure cabin causes its saturation (enrichment) of nitrogen vapors, therefore the patient should be protected with different means against breathing such air. The most reliable and safe equipment for cryogenic treatment is cryosauna KAEKT-01 “KRYON”, where patient is immersed in cryogenic gas up to the shoulders. The area above the cabin is ventilated, so the patient breathes pure atmospheric air. The cabin has movable floor for the patients of low height.

In spite of small size and simple look, nitrogen cooling cryosaunas superb so-called autonomic cryosaunas by their treatment results. Using of liquid nitrogen allows to cooled body surface with necessary velocity. Nitrogen cryosauna cooling power is 10 times more effective than compressive system. This great difference in power explains the quality consequence between nitrogen and compressive cryosaunas.

Cryosauna KAEKT-01 “KRYON” is 10 times cheaper; can be received within 40 working days after payment of the purchase price; can be installed within 1 day and occupies approximately 4 m2. Thanks to these advantages the cryosauna KAEKT-01 “Kryon” has been successfully exported in Finland, Germany, USA, Turkey, Slovakia, Korea, Israel, Poland, Latvia, Estonia, Ukraine etc.

The main advantages


  • Complex KAEKT-01 “KRYON” is 10 times cheaper as its foreign analogues.
  • Simplicity and safety of using.
  • Low power consumption, the system is plugged to public network.
  • Minimum preparation time for working option, preparation time takes 5 – 10 minutes.
  • Minimum area (it occupies 4 m2).
  • Minimum requirements for technical qualification of the staff.
  • Complex KAEKT-01 “KRYON” is the most often purchased cryosauna in the world, this system has been mostly produced and exported in the last 10 years.
  • With minimum size and power the complex KAEKT-01 “KRYON” makes possible 15 procedures per hour, and is 8 times more effective than his analogues.

At the present time there are in use more than 200 cryosaunas in the world. According to the experiences, the most successful saunas can serve about 60 patients a day with the procedure cost ten to twenty EURO per patient.

Technical characteristic of cryotherapeutical complex KAEKT-01 “Kryon” 


  The temperature in patient cabin
during the procedure

from -130°C
to -150°C

The time for starting mode


Procedure time

  from 30 up to 180 sec

Cooling agent consumption

  1,2 kg/min

Starting cooling agent consumption

  3,0 kg

Weight of system

  500 kg

System power consumption

  1,0 kW

Nominal voltage

  230±23 V, 50 Hz

Dimensions [mm]

  1600 x 2450 x 2200







2009 © Copyright Onkocet, s.r.o.
Všetky práva vyhradené. Realizácia: bk studio
home | devices | preparations | supplements | equipment |references | contact